ipega9023

 

The IPEGA 9023 is a bluetooth controller that allows you to mount a phone or tablet into it. The sides of the controller telescope out and then spring back in to grip what ever is in the center.

I bought my IPEGA 9023 for use with my Samsung Tab 10.5 tablet. I mentioned in my emulator review for it that I didn’t like the IPEGA because of button placement; turns out I was wrong about  that. It’s not the button placement I dislike, when you use the IPEGA 9023 with a device that’s heavy you (or at least I do) hold it in such a way that makes it uncomfortable. I figured this out while trying the IPEGA with a Samsung Galaxy S3. When using the smaller device the IPEGA works very well and I was happy with it.

Since then I’ve tried the IPEGA with an iPad Air and a LG G Tab 8.3. Both tablets fit into the IPEGA and are able to use it as a controller. Both tablets are heavy enough that I hold the IPEGA awkwardly and end up uncomfortable in a short period of time.

I’ve also tried the IPEGA with an iPhone 5s, Samsung Galaxy S3, and a Samsung Note 4. All three of those phones work really well with the IPEGA. I’m able to hold it comfortably for long periods of time.

Having your screen in the center of the controller does take a little getting use to though.

As a controller the IPEGA 9023 works well. Its definetly not on par with a PS3 or NVIDIA Shield controller, but it gets the job done. I’ve read some reviews online speaking about dead zones in the analog sticks, my controller either doesn’t suffer from this, or I’m not one to notice it.

All in all the IPEGA 9023 is a good solution to the problem of holding your phone and controller at the same time while playing games. Its not good for holding a tablet. Considering I bought it just for use with a tablet I’m a bit let down.

 

Samsung Tab S 10.5

NES: Great
Gameboy: Great
SNES: Great
Genesis: Great
Gameboy Advance: Great
N64: Good – the hardware is more than enough to run the games, the emulators available are the problem.
Playstation/PSX: Great
NDS: Great
GameCube and above: Poor – games are unplayable. (Emulator problem as much as a hardware problem)

I’ve had my Tab S 10.5 for about three weeks now. I bought it as a replacement for an iPad 3. It’s been rooted and all of the Samsung junk turned off. I use a PS3 controller via the Sixaxis app.

I’m very happy with the tablet as a tablet. As an emulator machine its really good. My only complaint is the same complaint I have with emulation on any tablet; how do you hold the tablet and the controller at the same time? I tried an Ipega 9023 telescopic controller, the mount was good, but the controller had poor button placement for my hands. That made the controller difficult to use. Next I tried to DIY solution using a Gameklip and a car tablet mount. The Tab S was too heavy for the Gameklip. I end up propping the Tab S up via its case and setting it on a lap desk. This works, but I would much rather to have it mounted on the controller.

Having such a large screen makes emulating Nintendo DS games much more enjoyable than on a Shield Portable or phone. You have plenty of room to see both screens at the same time. The downside of the big screen is that games will look bad unless you apply a filter. Once you apply some HQ filters though, the games look amazing.

My favorite emulation device is still the NVIDIA Shield Portable, if for no other reason than the screen is mounted over the controller. The Shield is pretty dedicated to one task though.The Tab S is a great choice when you need a tablet but you also want to play some games. The screen on the Tab S is amazing and when you use emulators that support filters, your old games never looked better.

Since the Tab S 8.4 has the same hardware as the Tab S 10.5, all of the above should equally apply to it.